EGRET EMG Data Collection Software
EMG Graphs in Real-Time (EGRET) is a real-time software for data collection and display. The software is designed for collecting surface Electromyography (EMG) data and is tailored specifically for electrophysiology (EP) studies in which the investigator needs to measure electrophysiological responses elicited by CNS or PNS stimulation. However, the software can display and record any type of signals received by supported ADCs.
One unique feature of EGRET is that it can calibrate Motion-Lab Systems (MLS) EMG devices in seconds and show the signal at the level of the skin. As such, this feature enables researchers to immediately measure the amplitude of Motor Evoked Potentials (MEPs) at the level of skin and easily determine the threshold of MEP. The Peak Analysis module of the software is specifically designed for H-reflex and MEP studies.
The free version is fully functional for one month from the time of installation. No license is needed during this time. However, recording raw data is limited to one minute.
Real-time graphs
Real-time calibration of MA-400, MA-300 EMG device. This tool converts the amplitude of the signal to that at the skin level. It also tests your MA EMG systems.
Peak Analysis
Ideal
for H-reflex and MEP studies. This module provides real-time calculation of H-reflex or MEP amplitude.
Calibration
Real-time calibration of MA-400, MA-300 EMG device. This tool converts the amplitude of the signal to that at the skin level. It also tests your MA EMG systems.
Export
Files can be exported to c3d, Matlab® and texts.
Enhance your MA-400 System
Using EGReT software, you will be able to visualize all recorded EMG and Forceplate signals in multiple monitors.
Enhance the performance of you Motion-Lab Systems MA-300 and MA-400 Devices by calibrating the signals with a couple of clicks.
Visit Motion Lab Systems website for more information about EMG system options.
Features
- Communicates with MCC and Dataq DI-720 USB* Boards
- Receives data from Biometrics Ltd software
- Exports to Various formats
- Calibrates Motion Lab Systems MA EMG devices
- Calculates MEP and H-reflex amplitude
- Displays signals in multiple monitors
* Dataq DI-720 line is nearing end of life by the manufacturer. We will not be able to support this board in near future and encourage the users to upgrade their system to an MCC USB-2533 board for full functionality of EGRET.
Trademarks
All Trademarks and registered trademarks are the property of their respective owners.
